HP DeskJet 3630 Wireless Printer Setup

To accomplish the HP DeskJet 3630 setup for your wireless, you can use the WPS or Wi-Fi protected setup. At the same time, you must also ensure a functional 802.11 b/g/n network along with a WPS-capable router or a wireless access point. This particular printer supports 2.4GHz connections. If you have a computer that you wish to print from, then you must connect that to the same network that you will setup the printer into. The HP Printer software is part of the HP DeskJet 3630 setup and you must have it installed on the PC. Follow the push-button method if you have a WPS router that is compatible with it.

HP Deskjet 3630 Setup

HP Deskjet 3630 Setup

PBC or Push-button method

  • To start WPS push mode, hold the Wireless button down on the printer for a little bit more than three seconds
  • Check if the wireless light is blinking
  • Now, go to your router and press the PBS button here too
  • A wireless connection gets established in approximately 2 minutes according to the product timer

PIN method

  • For this, you must first print a configuration page so that you are able to find your WPS PIN
  • Press the ‘Wireless’ and ‘Information’ button together and a page gets printed
  • Check for the required WPS PIN at the top of the page
  • For the wireless router or access point, open the configuration utility or software
  • Here, you must enter the WPS PIN and then wait for at least 2 minutes
  • The wireless light remains steady and stops blinking if the printer has connected successfully

Printer software

  • Establish the HP DeskJet 3630 setup for wireless with the help of a printer software
  • The software lets you connect the printer to an integrated WLAN 802.11
  • For this process, you need a computer that can connect to the same wireless network
  • At some point, during the setup, you will be asked to enter the WPA key and at the same time, you must also remember your SSID

Connection with the Windows computer

  • Here too, there are two ways to install the wireless software
  • You can either use the CD that accompanies the printer or download it from HP’s website
  • The CD is automatic installer that comes with prompts that you simply have to execute
  • During the setup process, the installer will ask you to attach USB cable between the computer and the printer
  • Select the wireless method of setup once you are prompted with a choice
  • Alternatively, if you have downloaded and installed the software on your Windows PC
  • Then go to Utilities -> Printer Setup & Software -> Connect a new printer -> Wireless
  • Thereafter, you just have to follow instructions presented to you
  • Till such time, you will notice that the wireless light is constantly blinking
  • Once the connection is successful, the light becomes steady

Using the OS X

  • The accompanying CD consists of drivers compatible with the MAC OS X as well
  • Insert it into your MAC computer to get the relevant driver software to accomplish the HP DeskJet 3630 setup for wireless

For more information, visit https://www.123-hp-com-dj3630.com/ or call us at +1-855-463-1360.

Leave a comment